Cleanroom Testing and Packaging

Assemblies are tested, cleaned, and packaged in Class 100k to 100 cleanrooms for transfer to OEM or FAB.

Cleanroom Services

Our controlled environments ensure precise manufacturing, adhering to strict cleanliness protocols to meet industry standards in semiconductor, medical, and life sciences sectors. We rigorously test, clean, and package your products to SEMI standards for seamless integration into your cleanroom, OEM, or FAB facility.

Innovent offers cleanrooms for assembly, calibration, leak checks, and inspection, ideal for laboratory tools and semiconductor fabs. For higher standards, our ISO 5 and 6 cleanrooms support optics, semiconductor, and robotics manufacturing, with services like DI water cleaning, N2 drying, vacuum sealing, and clean packaging.

ISO Certified Cleanrooms

Class 100 (ISO 5), Class 1,000 (ISO 6), and Class 100,000 (ISO 8)

Z

Quality Replication Testing

Quality replication of our customer’s final use case

Cleaning Processes

Certified to OEM specialty cleaning processes

Application Testing

Innovent requires that every component or assembly is put through qualification testing.

End Use Replication

Innovent invests in the equipment and fixturing to mimic our customer’s end use application. Examples here can range from a final vacuum leak check on our End Effectors, to powering up an amplifier to ensure fiberoptic beam strength. This is all meant to ensure that when our products leave the facility they are ready for final integration without any quality disruptions.

Final Dimensional Check

Some of the parts we make are just that – parts. Even here, there is a detailed process for final inspection of threaded holes, flatness, edge breaks, etc. Final inspections within the cleanroom can also include pad heights for End Effector assemblies.

Cleanroom Certification

Innovent has a dedicated ISO procedure that divides our cleanroom areas into more than 30 distinct locations. There is a matrix for when and how often each of these areas need to be measured for particles counts. All of these readings are backed up and stored on our server. These readings are the foundation for our annual ISO audit on the different cleanroom areas.

Parts Cleaning

All of these components have an end use in a SEMI FAB. Innovent is certified to OEM specialty cleaning processes.

Standard Cleaning Processes

All components are put through at least one of the following cleaning processes ahead of final assembly or packaging: DI rinse, ultrasonic, Acetone/IPA wipes. Innovent has dedicated cascading DI rinse tanks and procedures that are certifed to SEMI OEM standards.

Inspection Procedures

100% of all cleaned parts are subject to a full visual inspection prior to packaging. This ensures no variation on components within a certain job, or from lot-to-lot.

Product Packaging

Packaging is in an integral part of the cleaning process. It is imperative that parts go directly from the cleaning process to the cleanroom packaging area.

Why Nitrogen Purge?

The equipment that Innovent has in the packaging area is specifically designed for cleanroom compatibility. The nitrogen purge process helps to eliminate moisture and prevents oxidation of the components within the bagging material.

Vacuum and Sealed Packaging

Once the purge process is complete a vacuum is applied to eliminate as much air as possible. Each layer of bagging is then sealed to prevent particle contamination during shipment. This level of process control is critical to avoid particle issues at our customer’s location.

Get Started with Innovent

We simplify complexity to accelerate your success. With deep expertise in managing and delivering excellence, we’re ready to learn more about your project and how we can help.